Login
Our website has been updated as of May 12, 2025.
If you are unable to login with your password,
please try the Reset Password link.
If Reset Password does not respond with the a Password Reset message, please re-register your account.
Register
JET® JT9-354551 Spline Drive Floor Drill Press, 1 hp, 230/460 VAC, 1/2 in Chuck, 15 in Swing, 15 x 18 in Table
Price$2,866.67
Item #JET354551
BrandJET®
ManufacturerJPW Industries
Mfr. Model #JT9-354551
Country of OriginTW
UNSPSC Code23241801
UnitEA
DGI AvailabilityCall for Availability
Product Features
• Full bearing support on quill for maximum spindle stiffness
• Hand wheel speed adjustment of 400 to 5000 rpm
• Large 2-1/4 in quill for greater accuracy
• 3 in column diameter for maximum head support
• 6 in stroke for deep hole application
• Accurate depth stop for precise hole depths
• 1/2 in drill chuck and arbor included
• Safety collar
• Variable speed
Description
JET®, JT9-354551, Floor Drill Press, Spline Drive, 1/2 in Chuck, 15 in Swing, MT-2 Spindle Taper, 6 in Spindle Travel, 400 to 5000 rpm Spindle Speed, 25-3/4 in Spindle to Table Distance, 7-1/2 in Spindle to Column Distance, 15 x 18 in Table, 90 lb Table Load, 45 deg Right/Left Table Tilt, 20-7/16 x 14-3/16 in Base, 3 in Diameter Column, 1 hp, 230/460 VAC, 6.2/3.1 A, 30 in L x 20 in W x 71 in H Dimensions
These JET drill presses use a variable speed motor with the stepped-pulley system and come equipped with a continuously variable transmission. This enables use at a wide range of speeds, as well as the ability to change speed during operation. A scale-marked hand wheel that matches the desired machine speed is mounted to a reduction gearing system for precise operator control. This adjusts the gearing ratio between the motor's fixed pulley and the output shaft's variable pulley, changing the speed of the chuck. A tensioner pulley is implemented in the belt transmission to take up or release the slack in the belt as the speed changes.