* Image may not reflect actual product
Master STAGES™ WHAMEX-5G Whamex™ Machine Tool Sump/System Cleaner, 5 gal Pail, Liquid, Yellow, Mild

Price$222.92

Item #MTCWHAMEX5G

BrandMaster STAGES™

ManufacturerMaster Fluid Solutions

Mfr. Model #WHAMEX-5G

Country of OriginUS

UNSPSC Code47131800

UnitPA

DGI AvailabilityCall for Availability

Standards & Approvals
NSA
HSDS100214-01
Quantity
Login to see discount pricing.
Not Registered? Create an
 Account

Product Features


  • • A very specialized formula that draws on Master Chemical's knowledge of coolant formulation and many years of hands-on experience in machine cleanouts
    • Quickly breaks down and lifts off insoluble scum deposits hidden in lines and difficult to reach areas - getting rid of these residues is one of the best ways to extend coolant life in your system
    • Very hard water tolerant allowing it to be effective in raw water or used coolant
    • Environmental approvals are simplified because Whamex contains no nitrites, phosphates, barium, phenols, or butyl cellusolve; this formula has very low V.O.C. content and no SARA 313 reportable ingredients
    • When used as directed below, this product is compatible with TRIM® brand synthetic, semisynthetic, and soluble oil coolants, as well as most competitive coolants
    • Will remove heavy soils from machines without affecting paints, coatings, seals, hoses, or skirting, and it wont leave a slippery residue
    • Short-term corrosion inhibitors prevent flash rusting of machine surfaces and ways
    • PREFERRED METHOD FOR CLEANING MACHINE TOOLS AND CENTRAL SYSTEMS: Add 1%-3% Whamex™ into the machine sump and run machine as normal for at least 24 hours or more for best results, if the machine runs high pressure through-the-tool for significant amounts of time, the cleaner may cause some foam, keep a defoamer, such as Master STAGES™ DF1 or TRIM® TC 239, available during this process
    • After the Whamex™ has circulated for at least 24 hours, pump out the sump and remove all chips, sludge, residue and swarf. Remember to clean out overflow areas and flumes
    • Spray down the machine with a 10%-15% Whamex™ and water solution using The Whammer™ or a general-purpose garden sprayer. Scrub out the chips, sludge, and any other residues from all interior, exterior, tool changer areas including high-pressure sumps and filter canisters
    • 10.6 at 2% Working Solution, 10.5 at 5% Working Solution pH range
    • 215 deg F flash point
    • 120 deg F temperature
    • 12 Months shelf life