Login
Our website has been updated as of Aug 2, 2025.
If you are unable to login with your password,
please try the Reset Password link.
If Reset Password does not respond with the a Password Reset message, please re-register your account.
Register
Seco Feedmax™ 02780522 SD205 Composite Shank Drill, 4.1 mm Drill - Metric, 0.1614 in Drill - Decimal Inch, 120 deg Point, Solid Carbide, Uncoated
Price$766.77
Item #SEC02780522
BrandSeco Tools
ManufacturerSeco Tools
Mfr. Model #02780522
Country of OriginFR
UNSPSC Code23241605
UnitEA
DGI AvailabilityCall for Availability
| Standards & Approvals |
|---|
| DIN 6537A |
Product Features
• Seco Feedmax™ offers a unique combination of state-of-the-art carbide, coating and geometry technology
• Seco Feedmax™ is designed for high productivity and low cost per hole with high feeds up to 0.70 mm/rev and high cutting speeds up to 220 m/min
• With excellent centering capabilities - high hole quality is achieved with no need for center drilling operations
• Thanks to the modern coating with high hot hardness, the strong cutting edges with protective corner chamfers, high strength carbide rod, excellent chip evacuation capabilities and a superb cutting edge quality - a long and predictable tool life is achieved
• Seco Feedmax™ has a wide range of optimized geometries for different materials and applications, to obtain a good quality hole at the lowest cost
Description
Seco Feedmax™ Shank Drill, Composite, Series: SD205, Metric, 4.1 mm Drill - Metric, 0.1614 in Drill - Decimal Inch, 74 mm Overall Length, 5XD Cutting Depth, 2 Flutes, Spiral Flute, 37 mm Flute Length, 6 mm Dia x 36 mm L Shank, Cylindrical Shank, 120 deg Point, Self-Centering Point, Right Hand Cutting Direction, PCD Cutting Edge, No Through Coolant, Solid Carbide, Uncoated, Applicable Materials: CFRP and GFRP
Seco offers two distinct solutions for composite drilling: diamond-coated drills and polycrystalline diamond (PCD) drills. These tools feature geometries that are optimized specifically for regular composites or stacked materials. For drilling through plain composite materials, C1 and CX1 applies a double-angle geometry to redirect axial forces in a way that reduces uncut fibers and delamination in composite-only applications and applications with an exit in composite material. The C2 and CX2’s flat-geometry drill point machines stacked composite materials that incorporate layers of aluminum or titanium. With a drill point angle of 180 degrees , the geometry provides efficient chip breaking and evacuation. This reduces the risk of metal chips damaging the hole when transitioning between layers of metal and composites, keeping the surface finish of the composite intact. Both C1 and C2 are diamond-coated carbide drills featuring a Dura diamond coating that provides very good toughness and abrasive resistance to ensure long tool life. They can be used in CNC and handheld drilling machines.CX1 and CX2 are polycrystalline diamond (PCD) drills that offer enhanced productivity and tool life over conventional drills when machining composite materials. Offering the sharpest and strongest cutting edges currently available, the CX1 and CX2 PCD drills use solid PCD tips. These tips can be much sharper than diamond-coated drills because when the coating is applied, it wraps around the cutting edge and creates a dulling effect. Therefore, solid PCD-tipped drills offer higher cutting speeds, long tool life, low friction, superior thermal conductivity, multiple re-sharpening capacity and high process reliability. Seco offers a reconditioning service to further enhance the cost efficiency of these PCD drills.