Login
Our website has been updated as of May 25, 2025.
If you are unable to login with your password,
please try the Reset Password link.
If Reset Password does not respond with the a Password Reset message, please re-register your account.
Register
Starrett® 579D-12 Self-Centering Telescoping Gage With Two Telescoping Arms, Satin Chrome, 1-1/4 to 2-1/8 in Measuring, Rigid Handle, Steel
Price$141.00
Item #SPT63198
BrandStarrett®
ManufacturerL.S. Starrett
Mfr. Model #579D-12
Country of OriginUS
UNSPSC Code41111646
UnitEA
DGI AvailabilityCall for Availability
| Standards & Approvals |
|---|
| PROP65: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm |
Product Features
• Ends of both contacts are hardened and ground to a radius to allow proper clearance on the smallest hole the gage will enter
• Two telescoping contacts
• Precision ground radius on each gage provides two-point contact for maximum accuracy
• Greater range
• Constant spring tension gives uniform contact pressure
• Both plungers are easily locked at any desired setting
• Handles can be individually ordered, handles longer than 12 in (300 mm) are available on special order
• Handles are rigidly attached to the contact plungers and are automatically self-centering
Description
Starrett® Telescoping Gage, Self-Centering, Series: 579, 1-1/4 to 2-1/8 in Measuring, Rigid Handle, Steel, Satin Chrome, 7/16 in W Dimensions
The Starrett® 579 telescoping gage is used for determining the true size of holes, slots and recesses upto 6 in. The ends of both contacts are hardened and ground to a radius to allow proper clearance on the smallest hole the gage will enter. The tool must be slightly "rocked" in the hole being measured to ensure that the tool is on the proper diameter before it is locked and withdrawn. The final hole size is obtained by measuring over the gage contacts with a micrometer.