3M™, 7100136751, Masking Liquid, 5 gal Container, Pail Container, Liquid Form, Red, Mild Odor/Scent, 8 to 9.5 pH, 1.02 Specific Gravity, 212 deg F Boiling Point, >=200 deg F Flash Point, Composition: Water, Vinyl Acetate Vinyl Alcohol Polymer, 3 g/L VOC

3M™ overspray masking liquid dry (OML-D) is a water-based sprayable liquid that protects against automotive paint and primer overspray without added time for bulk tape masking. It dries to a clear, non-tacky film that bonds lightly, protecting vehicle surfaces and trapping dust and dirt under the film. It s safe to use on all thoroughly cured painted surfaces. Overspray masking liquid dry works with solvent or water-based paint systems to protect vehicle surfaces from automotive primer, sealer, base color and clear coat overspray. This makes it suitable for use in body bays and paint bays during primer or paint application. And the transparent film makes it easy to move the vehicle after application, adding versatility to auto body operations. The liquid masking sprays on easily using conventional spray guns so no equipment upgrades are needed and it saves significant shop time for masking hard to reach surfaces or for smaller paint jobs that require bulk tape masking. It dries to a clear, non-tacky film in as little as 20 min and bonds lightly, protecting vehicle surfaces during paint or primer application and trapping dust and dirt under the film. It is safe to use on all thoroughly cured painted surfaces. Because it dries onto the vehicle surface it eliminates the film flutter that can occur during conventional bulk masking, helping produce cleaner jobs throughout the shop. When primer or paint application is complete, the film simply dissolves and washes off in water for fast, easy cleanup. For best results do not leave on vehicles exposed to the sun. 3M™ overspray masking liquid dry is available in a variety of sizes from 1 to 55 ga. 1 ga of OML-D will cover approximately 400 sq-ft at 4.0 mil wet thickness (or about 4 to 5 average size vehicles per gallon). The proper wet application rate will yield a dry film thickness of approximately 0.4 mil. 3M™ provides liquid masking, another way to apply science for better procedures and better results in auto body repair and maintenance. Our lightly bonding spray-on water-based solution replaces time intensive masking jobs. And its easy cleanup - it simply dissolves in water and washes off - can make your entire collision repair operation smoother, more versatile and more efficient.