Scotch-Brite™, 7000120970, Abrasive Star, Eyelet, 2 in Star Diameter, Very Fine Grade, Aluminum Oxide Abrasive, Applicable Materials: All Metal, Arbor Attachment

Scotch-Brite™ star was designed for blending, deburring and finishing hard to reach internal diameters, including metal tubing and piping. Scotch-Brite™ star has six spindles attached to an eyelet. Made with non-woven technology, the spindles are spongy, buoyant and flexible. Consequently, they can bend and move to accommodate the insides of metal tubes and pipes. Scotch-Brite™ star comes in small sizes, with the smallest diameter being 1-1/2 in and the largest diameter being 4 in. The small size supplements the spongy spindles, helping the abrasive fit inside hard to reach areas. These stars lightly deburr and blend contours and ridges without gouging or marring the surface, helping to reduce scraps and rework. Stars may be used on a variety of metals - stainless steel, aluminum, carbon steel, cast iron, titanium and non-ferrous metals. Scotch-Brite™ star may be used with 3M™ mandrel 944 (sold separately). The threaded attachments fasten to mandrel 944 for safe use on a die grinder. Scotch-Brite™ star requires low pressure when used at correct operating speeds. The abrasive is available in coarse (CRS) and very fine (VFN) grades. Use a coarse abrasive when refining a deep grind line/scratch or when a more aggressive scratch pattern is desired and use a fine abrasive when a soft, fine scratch pattern is desired. Scotch-Brite™ star comes in packs of 50 or 100 stars per case to minimize the need for ordering replacements and to help reduce operating costs. Non-woven technology makes our Scotch-Brite™ industrial abrasives unique. A combination of fiber strands, resin and abrasive mineral forms a thick, open web. The spring like nature of the fibers responds to contours and effectively removes unwanted burrs, soils and contaminants while maintaining the geometry of the workpiece which in turn reduces rework and boosts productivity. Gaps in the web allow swarf to escape, so debris does not clog the mineral. Fibers in the web continually break down with use to reveal fresh mineral for exceptional consistency, superior cut performance and extremely long service life. Scotch-Brite™ products not only enhance productivity, but also increase operator safety. By reducing the need for cleaning chemicals and pastes and replacing wire brushes that can break off and cause injury. From aesthetic finishing to deburring and more, Scotch-Brite™ abrasives work fast and deliver consistent results, part after part.