Login
Our website has been updated as of Oct 20, 2025.
If you are unable to login with your password,
please try the Reset Password link.
If Reset Password does not respond with the a Password Reset message, please re-register your account.
Register
Starrett® 56C 56 Series Small Surface Gage
Price$467.00
Item #SPT50291
BrandStarrett®
ManufacturerL.S. Starrett
Mfr. Model #56C
Country of OriginUS
UNSPSC Code41114508
UnitEA
DGI AvailabilityCall for Availability
| Standards & Approvals |
|---|
| PROP65: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm |
Quantity
Product Features
• Weighs only ten ounces (.28kg.) and takes up very little space in a toolbox
• Only 1-3/8 in (35mm) high, including the lower sleeve in the rocker arm
• Scriber has a 3/32 in (2.4mm) diameter and is 3-1/4 in (82mm) long
• Smaller base and spindle than other surface gages and is designed for lighter work
• Two frictionally held gage pins in the steel base which can be pushed down and used against the edge of a surface plate or T-slot for linear work
• Ground bases for accurate reference surfaces
• V-Groove in the base for cylindrical work
• V-Groove on the front end which allows the spindle to adjust to any angle above or below the base
• A very positive fine adjustment through a rocker arm that makes for smooth and accurate settings
• Grooves on the side of the base for a sure and easy grip
• Nicely tapered scribers, so that you can see what you are doing
Description
Starrett® Surface Gage, Small, Series: 56 Series, Hardened Steel Base
Starrett Surface Gages are designed for a wide variety of uses. This is a basic tool for machinists and toolmakers. The main uses are for accurately scribing lines, transferring measurements and for probing surfaces in inspection work. 7" Spindle, 2" x 1 1/2" Base.