Login
Our website has been updated as of May 21, 2025.
If you are unable to login with your password,
please try the Reset Password link.
If Reset Password does not respond with the a Password Reset message, please re-register your account.
Register
Starrett® 683-2Z Internal Chamfer Gage, 0 to 1/2 in Measuring, Graduations 0.001 in, 3-Blade Plunger, Hardened Tool Steel
Price$564.00
Item #SPT63685
BrandStarrett®
ManufacturerL.S. Starrett
Mfr. Model #683-2Z
Country of OriginUS
UNSPSC Code41111600
UnitEA
DGI AvailabilityCall for Availability
| Standards & Approvals |
|---|
| PROP65: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm |
Product Features
• When the three blade plunger is pressed against a flat surface, the gage should read the set number stamped on the back of the indicator
• No setting master is necessary
• Internal gages will measure the largest diameter of any chamfer that has an included angle within the range of angles printed on the dial face
• Gages are also available with electronic indicators on request
• Deluxe padded case
• All ground surfaces are of hardened tool steel
• Indicators are AGD design
• Gages directly measure the diameter of chamfered holes
• For 0 - 90 deg Dial reading
Description
Starrett® Chamfer Gage, Internal, Series: 683, 0 to 1/2 in Measuring, Graduations: 0.001 in, 3-Blade Plunger, White Dial, Hardened Tool Steel
These gages directly measure the diameter of chamfered holes. No setting master is necessary. When the three blade plunger is pressed against a fl at surface, the gage should read the set number stamped on the back of the indicator. In case of wear, the gage may be adjusted to read the proper number. 0 - 1/2 in range in case of wear, the gage may be adjusted to read the proper number.